Equipment Introduction

FL1500 rubber track shot blasting cleaning machine is a shot blasting cleaning machine specially developed for the casting and metal parts industry to achieve efficient and low-cost shot blasting production.

This device fully considers factors such as large-scale product cleaning, convenient and fast logistics, reduced labor, and reduced production costs for users. The machine has the following characteristics:

1. This machine adopts two shot blasters, and all wear-resistant castings used are Cr21 material castings produced by our company. The bearings used in the shot blaster are imported from NSK, Japan. The shot blaster has the characteristics of large shot blasting volume, high shot blasting efficiency, long service life of wear-resistant parts, high reliability, and easy maintenance.
2. Using an automatic loading and unloading mechanism, users can directly place the material turnover box into the loading machine. The loading machine has a hopper with an animal material box, and the workpiece is poured into the cleaning room. After the workpiece is cleaned, the cleaning room door automatically opens, and the track reverses the unloading process. The workpiece is completed through the user’s own vibrating screen or belt conveyor for the next logistics work of the workpiece, and the entire operation process is fully automated, reducing labor costs, Reduced the labor intensity of workers.
3. This machine adopts a high wear-resistant vulcanized rubber track, which is beneficial for driving the workpiece to flip inside the cleaning room and reducing surface damage caused by the workpiece flipping. The track transmission adopts variable frequency speed regulation, and users can control the speed of the track at 2-5 cycles/minute according to the cleaning requirements of the workpiece, controlling the frequency of workpiece flipping and improving the cleaning effect.
4. To improve the separation efficiency of the projectile to ≥ 9%, the qualified projectile contains impurities such as sand ≤ 0.1%. This machine adopts an advanced three-level flow curtain full curtain shot slag separator (magnetic separation separator can be optional).

Primary drum magnetic separation technology – using magnetic drum selection, the coating in the shot can be thoroughly screened out (the pass rate of the shot is~99.9%)

Secondary air separation – Screen out small worn pellets to ensure shot blasting efficiency.

Third level screening – to prevent large particle impurities from entering the silo.

Main technical parameters